Bind a L2 VIP to PostgreSQL Primary with VIP-Manager

Module:
Categories:

You can define an OPTIONAL L2 VIP on a PostgreSQL cluster, provided that all nodes in the cluster are in the same L2 network.

This VIP works on Master-Backup mode and always points to the node where the primary instance of the database cluster is located.

This VIP is managed by the VIP-Manager, which reads the Leader Key written by Patroni from DCS (etcd) to determine whether it is the master.

Enable VIP

Define pg_vip_enabled parameter as true in the cluster level:

# pgsql 3 node ha cluster: pg-test
pg-test:
  hosts:
    10.10.10.11: { pg_seq: 1, pg_role: primary }   # primary instance, leader of cluster
    10.10.10.12: { pg_seq: 2, pg_role: replica }   # replica instance, follower of leader
    10.10.10.13: { pg_seq: 3, pg_role: replica, pg_offline_query: true } # replica with offline access
  vars:
    pg_cluster: pg-test           # define pgsql cluster name
    pg_users:  [{ name: test , password: test , pgbouncer: true , roles: [ dbrole_admin ] }]
    pg_databases: [{ name: test }]

    # 启用 L2 VIP
    pg_vip_enabled: true
    pg_vip_address: 10.10.10.3/24
    pg_vip_interface: eth1

Beware that pg_vip_address must be a valid IP address with subnet and available in the current L2 network.

Beware that pg_vip_interface must be a valid network interface name and should be the same as the one using IPv4 address in the inventory.

If the network interface name is different among cluster members, users should explicitly specify the pg_vip_interface parameter for each instance, for example:

pg-test:
  hosts:
    10.10.10.11: { pg_seq: 1, pg_role: primary , pg_vip_interface: eth0  }
    10.10.10.12: { pg_seq: 2, pg_role: replica , pg_vip_interface: eth1  }
    10.10.10.13: { pg_seq: 3, pg_role: replica , pg_vip_interface: ens33 }
  vars:
    pg_cluster: pg-test           # define pgsql cluster name
    pg_users:  [{ name: test , password: test , pgbouncer: true , roles: [ dbrole_admin ] }]
    pg_databases: [{ name: test }]

    # 启用 L2 VIP
    pg_vip_enabled: true
    pg_vip_address: 10.10.10.3/24
    #pg_vip_interface: eth1

To refresh the VIP configuration and restart the VIP-Manager, use the following command:

./pgsql.yml -t pg_vip

Last modified 2024-06-25: translate en software tutorial (b37df0f1)